От: Преден мост,начини за правилен монтаж.
Обяснение какво става когато не е спазено това условие:
Като мине през неравност гумата завива.
Първоначално публикуван от petroffbg
Преглед на мнение
Обяснение какво става когато не е спазено това условие:
This is much the same as the comment on the bottom of the pic.
"Further to this the top and bottom ball joint centres on the stub axle and the tie rod and chassis pick up points "X"-"A" "Y"-"B" and "Z"-"C" must be as shown in the diagram) in a similar horizontal plan)"
I think if you got your compass out and started drawing arcs off the chassi pic up points one would see how the steering can be "self steer" as the wheel moves up and down. I have tried to explain it in the following pics
Normal Rack
[ATTACH=CONFIG]969446[/ATTACH]
With the rack lower
[ATTACH=CONFIG]969447[/ATTACH]
and higher
[ATTACH=CONFIG]969448[/ATTACH]
Hope this helps, i have actually been meaning to have a look at this for my own benifit for some time so thanks for the kick
As i understand the only way to absolutely remove bump steer is to either have the steering arm and rack level with either the top or bottom wishbone thus having the exactly the same arc. Hope this helps, could be all wrond but it seems to work.
"Further to this the top and bottom ball joint centres on the stub axle and the tie rod and chassis pick up points "X"-"A" "Y"-"B" and "Z"-"C" must be as shown in the diagram) in a similar horizontal plan)"
I think if you got your compass out and started drawing arcs off the chassi pic up points one would see how the steering can be "self steer" as the wheel moves up and down. I have tried to explain it in the following pics
Normal Rack
[ATTACH=CONFIG]969446[/ATTACH]
With the rack lower
[ATTACH=CONFIG]969447[/ATTACH]
and higher
[ATTACH=CONFIG]969448[/ATTACH]
Hope this helps, i have actually been meaning to have a look at this for my own benifit for some time so thanks for the kick
As i understand the only way to absolutely remove bump steer is to either have the steering arm and rack level with either the top or bottom wishbone thus having the exactly the same arc. Hope this helps, could be all wrond but it seems to work.
Коментар